Line-start synchronous reluctance motors (LSSynRM) combine the high efficiency of synchronous reluctance Motors (SynRM) with the self-starting capability of induction motors. They operate at synchronous speed in steady state and produce minor rotor losses, thereby providing higher efficiency than induction motors and a higher power density. Despite the simple structure of LSSynRM, its analysis, modeling, and optimal design pose several challenges. In particular, design trends aiming at higher starting capabilities and improved steady-state operation pose significant hurdles. In this study, three synchronous reluctance motors with line-start capability are designed to achieve maximum efficiency at steady-state operation with the optimum amount of copper for starting. The induction cage is constructed using rectangular bars installed in flux barriers to minimize the changes in performance under the steady-state condition. Although different rotor shapes offer similar steady-state performance, they achieve synchronism using different cage bar widths. The rotor with the lowest copper weight is selected for manufacturing. The prototype is constructed based on the optimal design. The experimental results are in good agreement with the simulation results.Line-start synchronous reluctance motors (LSSynRM) combine the high efficiency of synchronous reluctance Motors (SynRM) with the self-starting capability of induction motors. They operate at synchronous speed in steady state and produce minor rotor losses, thereby providing higher efficiency than induction motors and a higher power density. Despite the simple structure of LSSynRM, its analysis, modeling, and optimal design pose several challenges. In particular, design trends aiming at higher starting capabilities and improved steady-state operation pose significant hurdles. In this study, three synchronous reluctance motors with line-start capability are designed to achieve maximum efficiency at steady-state operation with the optimum amount of copper for starting. The induction cage is constructed using rectangular bars installed in flux barriers to minimize the changes in performance under the steady-state condition. Although different rotor shapes offer similar steady-state performance, they achieve synchronism using different cage bar widths. The rotor with the lowest copper weight is selected for manufacturing. The prototype is constructed based on the optimal design. The experimental results are in good agreement with the simulation results. Leer más
Related posts:
Frequency-Switchable Routing Protocol for Dynamic Magnetic Induction-Based Wireless Underground Sensor Networks
A 65nm Cryogenic CMOS Design and Performance at 4.2K for Quantum State Controller Application
A 28GHz, Switched-Cascode, Class E Amplifier in 22nm CMOS FDSOI Technology
Design and Simulation Optimization of an Ultra-Low Specific On-Resistance LDMOS Device
Integrated Wideband Multiplexer Design for Multiple-Use SATCOM/Terrestrial Terminals
Dietary protein requirement level of tinfoil barb (Barbonymus schwanenfeldii Bleeker 1853) fry